web analytics
[Q1-Q10] Ensure Pass JN0-647 Exam By Training Lead2pass New PDF Dumps - Latest Dumps PDF Free Download In Lead2pass

[Q1-Q10] Ensure Pass JN0-647 Exam By Training Lead2pass New PDF Dumps

Ensure Pass JN0-647 Exam With Lead2pass New JN0-647 Brain Dumps:

https://www.lead2pass.com/jn0-647.html

QUESTION 1
Your campus EX9200 core devices are highly oversubscribed on bandwidth ans reporting massive dropped packets. To immediately address the issue, you decide to implement shaping on all interfaces.

Which action will accomplish?

A.    Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
B.    Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
C.    Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
D.    Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.]

Answer: C

QUESTION 2 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
What allows non-Web enabled devices to access the network on a port configured for captive portal?

A.    A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
B.    LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
C.    Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.
D.    Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.

Answer: A

QUESTION 3 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

31

You have deployed sparce-mode multicast in your network using the IGP metrics shown in the exhibit.

Which path will (*, G) traffic follow form the source to the receiver before the (S, G) state is registered?

A.    Source, R1, R4, R5, R6, Receiver
B.    Source, R1, R2, R5, R2, R3, R6 Receiver
C.    Source, R1, R2, R3, R6, Receiver
D.    Source, R1, R2, R5, R6, Receiver

Answer: B

QUESTION 4 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

41

You are troubleshooting an OSPF adjacency issue between R1 and R2.

What is the reason for the ExStart state shown in the exhibit?

A.    R2 was elected as the designated router.
B.    R1 was elected as the backup designated router.
C.    R1 and R2 are using the same IP address.
D.    The MTU is not the default on R1 and R2.

Answer: C

QUESTION 5 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

51

Router R1, in peer AS 65001, advertises routes to R2 using EBGP. R2 advertises the routes learned from R1 to R3 using IBGP.

Referring to the exhibit, to which routers will R3 advertise the BGP routes received from R2?

A.    R6, R7
B.    R4, R5, R6, R7
C.    R4, R5
D.    R2, R4, R5, R6, R7

Answer: C

QUESTION 6 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

61

Referring to the exhibit, which statement is true?

A.    R1 is an ASBR.
B.    R1 has the B bit set.
C.    R1 is a backbone router.
D.    R1 is an ABR.

Answer: A

QUESTION 7 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Which two statements are true about PIM source-specific multicast (SSM)? (Choose two.)

A.    The receiver DR builds a source-base tree to the RP.
B.    S, G is always used.
C.    A Different group address must be used by each source.
D.    IGMPv3 is required.

Answer: BD

QUESTION 8 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

81

You are configuring MSTP to prevent loops in your Layer 2 network. After applying the configuration, you notice that MSTO is not working correctly.

Referring to the exhibit, what is causing the problem?

A.    Too many VLANs have been defined.
B.    Context identifier must be specified.
C.    MSTI-to-VLAN mappings must be the same.
D.    Incorrect revision number is used.

Answer: C

QUESTION 9 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Click the Exhibit.

91

A customer on MSTI-2 was isolated due to a physical link outage on Switch 5’s ge-0/0/32 interface.

Referring to the exhibit, which corrective action would solve this problem?

A.    replace the link between Switch 5 and 6 with a 10 Gbps link
B.    Implement the CIST on all switches.
C.    Move the root bridge for MSTI-2 to Switch 6.
D.    Add MSTI-2 to all interfaces on Switch 5.

Answer: D

QUESTION 10 JN0-647 Dumps,JN0-647 Exam Questions,JN0-647 New Questions,JN0-647 VCE,JN0-647 PDF
Which two statements about MVRP are correct? (Choose two.)

A.    MVRP monitors interfaces using VSTP and dynamically creates VLANs as necessary
B.    MVRP PDUs are sent to other switches as periodic intervals.
C.    MVRP can propagate dynamic VLANs created on one switch to another switch
D.    MVRP is enabled by adding trunk ports under the [edit protocols mvrp] hierarchy.

Answer: BD

JN0-647 dumps full version (PDF&VCE): https://www.lead2pass.com/jn0-647.html

Large amount of free JN0-647 exam questions on Google Drive: https://drive.google.com/open?id=1KdYnfjldTm71Qle4hxd8vwiskvK9pf_L

You may also need:

JN0-643 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDQzh5Nk1hOG0tLUE

Comments are closed.